Our Advantage
This product adopts COB encapsulation technology, which is different from the traditional SMD surface-mount encapsulation. It integrates the light-emitting RGB chip on the PCB board instead of soldering LED lamp to the PCB one by one. This technology effectively improves the reliability, light color and protection performance of LED display.
- 600mm x 337.5mm die-casting aluminum cabinet with very thin thickness 32.5mm. compatible pitch 0.93/1.25/1.56/1.875.
- Flip chip COB support common cathode solution, low consumption, and more stable.
- The Horizontal and vertical viewing angle reach 170 degrees, wider than SMD screen.
- Big high-quality chip, pure gold bonding wires, and pads are immersed gold technology, which is more reliable.
- High refresh rate at low gray, refresh rate more than3840HZ, Grey scale more than 14Bit.
- Excellent heat dissipation and low light decay, PCB board dissipate heat directly, extendedservice life.
- Module face IP65,water-proof, dust-proof, anti-oxidation, anti-static, anti-impact.
- 16:9 ratio cabinet design,2K/4K/8K dot to dot match resolution,100% front service.
Front Maintenance
1. Front maintenance within 3 second,you can easier take out module within 3 seconds with professional tool,reduce maintenance costs.
2. Module, power supply and receiving card,can be front maintained. *Save time, labor & cost,Magnetic front service.
3. Disassemble a module in 1 second.
Smart Module
Horizontal & vertical detection
Intelligent horizontal display module immediately shows the tilt angle when the individual cabinets are not leveled, so the installers can adjust in time according to the deviation data.
Visible flatness adjustment
When the cabinet is installed, the horizontal and vertical angles of the cabinet can be displayed in real time. The staff can adjust the inclination according to the display data in time for the best cabinet position, improved flatness, and better visual effect.
2K/ 4K /8 K dot to dot matching
